Skip to main content
WISP Planner Sign up

Radio datasheet

Cambium ePMP 3000 FSR 5.1-5.9 GHz AP

Radio · Connectorized

Cambium ePMP 3000 FSR 5.1-5.9 GHz AP

Cambium Networks · Physical model: ePMP 3000 FSR 5.1-5.9 GHz

Logical radio: ePMP3000-FSR

5.1-5.97 GHz connectorized 4x4 MU-MIMO/OFDM PtMP access point with four 50-ohm SMA antenna ports.

Open link previewPreview terrain visibilityCompare this radioReport a correctionProvide a newer source
Antenna
External antenna required

RF specifications

Frequency bands
5.1 GHz–6.0 GHz
Channel widths
20, 40, 80 MHz
Catalog link-budget transmit power
32 dBm Power semantics and source provenance are not yet recorded; this value is used by the planner catalog.
Beamwidth
Not applicable
Pattern
Not recorded
Pattern source
Not recorded
Product source
radio_datasheets/Cambium_Networks_data_sheet_ePMP_3000_FSR.pdf
Source date
2025-08-04
Source revision
Cambium ePMP 3000 FSR 5.1-5.9 GHz data sheet, pp. 1-3, footer 08042025; radio_datasheets/cambium_epmp_3000_ap_extraction_2026-07-23.md.
Catalog notes
The 5140 MHz catalog selection is a LibrePlanner 5 GHz planning selection inside the published wide-band range (lower band bound 5100 MHz plus half the widest published 80 MHz channel width), not a vendor-stated operating default; allowable frequencies and channel plans are set by individual-country regulations. The 60 degree beamwidth is LibrePlanner's neutral connectorized-radio default, not an external-antenna claim. The named C050910D301A sector and C050900D020A smart antennas are separate equipment and no fixed antenna pattern, gain, beamwidth, or polarization is inferred. Only the published 20/40/80 MHz MCS0 and MCS9 nominal receive-sensitivity endpoints are recorded; the unprinted MCS 1-8 values are unknown and are not interpolated. The two ROW order codes C050911A101A and C050911A201A are power-cord package variants of this one RF radio and are not separate radio rows.

Compatible antenna choices

Other catalog antenna candidates

Recorded bands overlap, or one side has no recorded band. Verify frequency, connector, adapter, and polarization compatibility before use.

Logical radios in this physical unit

  • Cambium ePMP 3000 FSR 5.1-5.9 GHz AP (current) · ePMP3000-FSR · up to 1

Receive sensitivity

Channel widthModulationMCSRequired signalCatalog rating
20 MHzBPSKMCS0-92 dBmUnrated
20 MHz256-QAM 5/6MCS9-68 dBmUnrated
40 MHzBPSKMCS0-89 dBmUnrated
40 MHz256-QAM 5/6MCS9-64 dBmUnrated
80 MHzBPSKMCS0-86 dBmUnrated
80 MHz256-QAM 5/6MCS9-61 dBmUnrated